New Trends in Aviation Development 2019

Welcome

Dear author, you are welcome to submit your paper and attend the New Trends in Aviation Development International Scientific Conference (NTAD 2019) which will be held on September 26 - 27, 2019 at the Castle Karlova Koruna in Chlumec nad Cidlinou, Czech Republic. The conference is organized by the University of Pardubice, Czech Republic and the Faculty of aeronautics, Technical University of Košice, Slovakia.

General information

• Date and Place
The conference will take place on September 26 - 27, 2019 at the Castle Karlova Koruna , Pražská 1/IV in Chlumec nad Cidlinou, Czech Republic.
• Official Language
The official language of the conference is English. All the camera-ready manuscripts should be submitted in English, and presentations should be made in English. No translation is provided.
• Paper Presentation
All paper must be presented either in oral session or in poster session. If a paper, included into the proceedings, fails to be presented any way at the conference, all authors of the paper will be bar out from paper submission to conferences of the organizers in the future.
Oral Presentation

Presentations can be made by using OHP or data projector. All authors are kindly asked to take their presentation on CD or USB drive. To present the paper it is not allowed to use own computer. Conference room is supplied with OHP and data projector with PC.
Poster Presentation

If you choose to present your paper in a poster session, not in an oral session, please prepare the presentation into 9 A4 sheets or 1 large (70x100 cm) sheet, bring it with you to the conference and post it to the chart. Poster presentation does not mean just to print out your final paper, but it should be edited to make it scenic.
• Opening Hours of the Registration Desk
The registration desk will be open during the conference.
• Cancellation and Refund
In case you need to cancel your participation at the conference, the cancellation must be sent in writing and sent to the Conference Office by mail or e-mail. In this case 80% of the received sum will be transferred back. Refunding of the conference fees (to be returned to the participant) (as per mail stamp or date of your mail or e-mail messages) is not possible after August 31, 2019.
• Proceedings
Each accepted paper reaching us in time will be published in the volume of proceedings that will be distributed at the registration desk.

Indexing

Accepted papers will be submitted to inclusion into IEEE Xplore Digital Library, SCOPUS and Web of Science (WoS).

What is Our Goal?

A central goal of conference is to provide an international forum for presentation of recent progress on air traffic management and operations, aircraft design and aviation technologies as well as issues of education, management, policy, planning and market aviation affecting the future direction of the aviation industry. The second goal was to offer a venue for interaction between researchers, system developers, product support personnel, managers, and business developers from aviation industry, government, and academia to share research findings and practical experiences. The conference also aims to serve as a meeting place where people can identify new research ideas and techniques for introducing them into widespread use in aviation and related fields.

We invite talented researchers to submit their contributions with the results obtained in the field of their research. Plenary tackled the most pressing issues impacting the future of aviation, while the technical forum presented innovative research and technologies that offer solutions. We are looking for innovation in order to demonstrate dramatic results in the research area.

Conference topics

• Avionic systems
Navigation systems, digital aircraft systems, aircraft communication systems, flight and engine control systems, on-board digital systems, electronic instrument systems, aircraft electrical systems, management of on-board systems, progressive avionic systems, human machine interfaces, advanced warning systems,
• Aircraft design and construction:
CAD, CAM , CAX, CAE - technologies in aviation, progressive construction technologies, composite materials, advanced simulation methods, constructive design
• Aerodynamics
computational fluid dynamics, aircraft stability, measurement of aerodynamic characteristics, progressive aerodynamic design and calculations
• Air Traffic Management and Operations
Air traffic control, air traffic flow management, aeronautical information services, piloting the aircraft, air navigation, aviation meteorology, human factor and performance, training and education
• Air Transport Management
security management, environmental factors, logistic systems, progressive information systems
• Aviation safety
modeling and simulation of safety systems, technical reliability analysis, virtual simulation technologies, safety legislation, certification process, human factor, safety risks, accidents’ analysis
• Aircraft propulsion systems
gas turbine engines, aviation piston engines, engine control systems, engine diagnostic systems, simulation and modeling, progressive materials in aviation engines, electric propulsion systems
• Sensors
magnetic sensors, digital measurement equipment, MEMS Technologies, intelligent sensors, aerometric computers, inertial reference systems, analogue sensing techniques, hybrid sensors, sensor networks, sensors modeling
• Unmanned aerial systems
modeling, control and diagnostics, virtual simulation, navigation, detection of UAV systems, UAV security, anti UAV systems, legislation processes, certification, swarming, propulsion, energy storage, commercial applications, ground control stations
• Airport operations
airport management, airport economics and logistics, airport security, airport transportation systems, aircraft ground handling management, aircraft ground navigation, surface movement guidance and control systems
• Space systems
cube-sats, propulsion systems, space navigation, orbital control, communication systems, safety and security of space vehicles, control systems, space applications

General chairs

Stanislav Szabo, Technical University of Košice, Slovakia
Libor Švadlenka, University of Pardubice, Czech Republic

Honorary Committee

Pavel Czarnecki, Collegium Humanum Warsaw Management University, Poland
Péter Kádar, Óbuda University, Budapest, Hungary
Miroslav Kelemen, Technical University of Košice, Slovakia
Levente Kovács, Óbuda University, Budapest, Hungary
Jakub Kraus, Czech Technical University in Prague, Czech Republic
Vladimír Němec, University of Pardubice, Czech Republic
Jindřich Ploch, College of International and Public Relations Prague, Czech Republic

Technical program Committee chairs

Ladislav Főző, Technical University of Košice, Slovakia
Rudolf Andoga, Technical University of Košice, Slovakia

Organizing committee chairs

Peter Korba, Technical University of Košice, Slovakia
Alica Tobisová, Technical University of Košice, Slovakia

Organizing Committee

Daniel Blaško, Technical University of Košice, Slovakia
Lenka Brumarová, Technical University of Ostrava, Czech Republic
Samuel Bucko, Technical University of Košice, Slovakia
Marek Češkovič, Technical University of Košice, Slovakia
Petr Daňko, University of Pardubice, Czech Republic
Jozef Galanda, Technical University of Košice, Slovakia
Štefan Fejedelem, Elfa, ltd., Slovakia
David Hůlek, University of Pardubice, Czech Republic
Edina Jenčová, Technical University of Košice, Slovakia
Marek Košuda, Technical University of Košice, Slovakia
Tomáš Krejsa, University of Pardubice, Czech Republic
Dorota Liptáková, Technical University of Košice, Slovakia
Lucia Melníková, Technical University of Košice, Slovakia
Petr Mrázek, University of Pardubice, Czech Republic
Martin Novák, University of Pardubice, Czech Republic
David Řeha, University of Pardubice, Czech Republic
Martin Schrotter, Technical University of Košice, Slovakia
Stanislav Szabo jr., Technical University of Košice, Slovakia
Miroslav Šmelko, Technical University of Košice, Slovakia
Martin Šustr, University of Pardubice, Czech Republic
Iveta Vajdová, Technical University of Košice, Slovakia
Victorie Zharkova, University of Pardubice, Czech Republic

Secretary general

Eva Endrizalová, University of Pardubice, Czech Republic
Edina Jenčová, Technical University of Košice, Slovakia
Lucia Melníková, Technical University of Košice, Slovakia
Dorota Liptáková, Technical University of Košice, Slovakia

Technical program committee

Helena Beková, University of Pardubice, Czech Republic
Károly Beneda, Budapest University of Technology and Economics, Hungary
Aleš Bernatík, Technical University of Ostrava, Czech Republic
Josef Blažek, Technical University of Košice, Slovakia
Monika Blišťanová, Technical University of Košice, Slovakia
Endre Borbély, Óbuda University, Budapest, Hungary
Róbert Bréda, Technical University of Košice, Slovakia
Lenka Brumarová, VSB - Technical University of Ostrava, Czech Republic
Martin Bugaj, University of Žilina, Slovakia
Jan Chmelík, University of Pardubice, Czech Republic
Malgorzata Dobrowolska, Silesian University of Technology in Gliwice, Poland
Katarína Draganová, Technical University of Košice, Slovakia
Zdeněk Dvořák, University of Žilina, Slovakia
Milan Džunda, Technical University of Košice, Slovakia
Beáta Gavurová, Technical University of Košice, Slovakia
Laurian Gherman, Air Force Academy in Brašov, Romania
György Györök, Óbuda University, Budapest, Hungary
Michal Hovanec, Technical University of Košice, Slovakia
Jaroslava Hyršlová, University of Pardubice, Czech Republic
Bernadetta Izydorczyk, Jagiellonian University, Krakow, Poland
Rudolf Jalovecký, University of Defense in Brno, Czech Republic
Luboš Janko, Czech Technical University in Prague, Czech Republic
Artūras Keršys, Kaunas University of Technology, Lithuania
Robertas Keršys, Kaunas University of Technology, Lithuania
József Kopják, Óbuda University, Budapest, Hungary
Peter Koščák, Technical University of Košice, Slovakia
Pavol Kurdel, Technical University of Košice, Slovakia
Ján Labun, Technical University of Košice, Slovakia
Benedek Nagy, Eastern Mediterranean University, North Cyprus, Turkey
Pavel Nečas, Matej Bel University, Banská Bystrica, Slovakia
Andrej Novák, University of Žilina, Slovakia
Zdeněk Pátek, National Center for Research, Development and Testing in Aerospace, Czech Republic
Jiří Pokorný, VSB - Technical University of Ostrava, Czech Republic
Petr Průša, University of Pardubice, Czech Republic
Róbert Rozenberg, Technical University of Košice, Slovakia
Karol Semrád, Technical University of Košice, Slovakia
Monika Skalská, University of Pardubice, Czech Republic
Petr Adolf Skřehot, ZUBOZ z.ú., Czech republic
Radovan Soušek, University of Pardubice, Czech Republic
Marta Stasila – Sieradzka, Silesian University of Technology in Katowice, Poland
Márta Takács, Óbuda University, Budapest, Hungary
Dušan Teichmann, VSB - Technical University of Ostrava, Czech Republic
Robert Theiner, Czech Technical University in Prague, Czech Republic
František Vavera, General Directorate of Fire Rescue Service of CR, Czech Republic
Árpád Veress, Budapest University of Technology and Economics, Hungary
Norbert Werner, Eötvös Loránd University, Budapest, Hungary
Jan Zýka, VSO University College Of Business in Prague, Czech Republic

Full Paper Submission

Authors are asked to submit electronically the full paper through electronic paper submission system.

The official language of the symposium is English.

Authors should submit IEEE standard double-column paper with the minimum of 4 full pages, and maximum pages of 6.

Authors are kindly asked to submit their paper through electronic paper submission system. Papers sent by email are not acceptable.

The paper should be original and unpublished. Please, do not copy from other publication, because the paper will be checked by IEEE plagiarism detection software, and it will indicate if there are copied parts. IEEE takes it very seriously, here are all details regarding plagiarism.

If the paper is not original, not authors' own work, or submitted to other conferences or journals, or a copy of another paper, then the paper is removed at once. It is not even allowed to copy from author's own paper.

The paper may be checked against plagiarism at any time during review process from paper submission until publication.

Electronic paper submission system will remain open until July 15, 2019. Sorry, but no deadline extension.

Submission Preparation Checklist

1. The authors warrant that the work is original and that it contains no content that is illegal or offends any proprietary right or any copyright.
2. The submission has not been previously published, nor is considered in another journal (or an explanation has been provided in Comments to the Editor).
3. The submission file is in the Microsoft Word document file format in accordance with a provided template.
4. When images are embedded in Word, the original images (TIFF/EPS files) are submitted also separately.
5. You have at least 2 separate documents: Manuscript and Consent to Publish & Transfer of Copyright

Final Paper Submission

The final papers should be checked with the PDF eXpress tool (instructions see here) on IEEE PDF eXpress site and then the newly created PDF, which is an output from PDF eXpress, should be uploaded to our submission portal! PDF eXpress tool only checks for compatibility of the paper with the IEEE standards and is not used for the NTAD2019 paper submission!

Accepted papers will be submitted to inclusion into IEEE Xplore Digital Library, SCOPUS and Web of Science (WoS).

Copyright Notice

The author(s) guarantees that the submitted article is original, has not been published previously, is not under consideration for publication elsewhere, and that any necessary permission to quote from another source has been obtained. (A copy of any such permission should be sent with the submission.) The Author(s) agrees with the Consent to Publish & Transfer of Copyright and the signed form is uploaded along with the submission. The author who signed the Consent to Publish & Transfer of Copyright form declares that any person named as a co-author of the Contribution is aware of the fact and has agreed to be named.

Registration

The registration is completed if you:

• filled in the online registration form below,
• arranged the registration fee payment by wire transfer, it must be RECEIVED by August 10, 2019,
• submitted the final paper until August 31, 2019 the latest.

Only one paper can be included into the proceedings by paying one registration fee. For including any paper in the proceedings, it is necessary for at least one co-author to be registered and the registration fee has to be paid in advance until August 10, 2019. Author's second paper costs EUR 20/page.

Online Registration Open from June 1, 2019

Registration fee

Registration fee:	EUR 350
IEEE member:	EUR 300
Student:	EUR 250
IEEE student:	EUR 230
Accompanying person:	EUR 200

The payments have to be made in EURs.

Registration Fee Payment

After obtaining e-mail notification of acceptance of your paper (i.e. after reviewing process) you can pay the conference fee in favor of following conference bank account:

Account holder: elfa, s.r.o., Park Komenského 7, SK-04001 Košice, Slovakia
Bank: Tatra banka, a.s., Štúrova 28, SK-04001 Košice, Slovakia
Bank Account: 2926884443 / 1100
IBAN: SK85 1100 0000 0029 2688 4443
Variable symbol: XXXX882018
SWIFT code is: TATRSKBX
ID Message (IMPORTANT!): NTAD 2019 / Participant Name

Registration fee includes access to the NTAD conference venue and program, IEEE proceedings, coffee breaks and refreshment, lunches and evening raut at the conference venue.Any additional expenses pertaining to banking operations are not included in the registration fee and must be covered by the registrants.

Cancellation of registration: In case you need to cancel your participation at the conference, the cancellation must be sent in writing and sent to the Conference Office by mail or e-mail. Refunding of the conference fees (to be returned to the participant) (as per mail stamp or date of your mail or e-mail messages) is not possible after August 31, 2019.

Any additional expenses pertaining to banking operations are not included in the registration fee and must be covered by the registrants.

ACCOMMODATION

We're sorry, but accommodation is not provided within the conference. Accommodation can be booked according to your own choice. More information can be found on Booking.com.